Industry News- Ningbo Danko Vacuum Technology Co., Ltd.

What are the factors affecting target poisoning in magnetron sputtering
Apr 13,2022
First, the formation of target metal compounds In the process of forming the compound from the metal target surface through the reactive sputtering process, where is the compound formed? Because the ...
Application of Vacuum PVD Coating Technology in Die Casting Mould
Apr 06,2022
The friction coefficient of the surface of the vacuum PVD coating is small. The friction coefficient of the surface of the polished metal material to the steel is generally about 0.9. The friction coe...
Share the functions and features of coating machine extrusion coating technology
Apr 01,2022
The currently popularized coating machine offset printing device solves the problem that the lateral tension of the substrate in the oven changes and the substrate is more easily blown off when the ex...
Analysis of common defects in coating（2)
Mar 22,2022
Membrane white fog Phenomenon: After the coating is completed, there is some light white mist on the surface. If you wipe it with acetone or a mixed solution, the phenomenon will become more and more...
Analysis of common defects in the coating(1)
Mar 15,2022
dirty grey Phenomenon: There are some points (not film material points) on the surface or inside of the lens film layer, some can be erased, and some cannot be erased. And there will be point-like pe...
Ten Problems in PVD Coating Processing (Part 2)
Mar 08,2022
6: What are the characteristics of the film-coated by PVD coating technology? Answer: The film-coated by PVD coating technology has the characteristics of high hardness, high wear resistance (low fri...
Ten Problems in PVD Coating Processing (Part 1)
Mar 01,2022
1. What is PVD coating technology? Answer: PVD is the abbreviation of Physical Vapor Deposition in English, and it means "physical vapor deposition" in Chinese. It refers to the thin film preparation...
How to use vacuum coating equipment correctly?
Feb 22,2022
In the case of normal operation of the machine tool, to start the machine, you must open the water pipe, and you should always pay attention to the working water pressure. At the same t...
What is the difference between evaporative coating and sputtering coating？
Feb 17,2022
Vacuum evaporation film is to heat the material to be evaporated to a certain temperature by resistance heating or electron beam and laser bombardment in an environment with a vacuum degree of not les...
What are the normal working conditions and maintenance methods of vacuum coating equipment？
Feb 09,2022
Normal working conditions of vacuum coating equipment 1. Ambient temperature: 10~30℃ 2. Relative humidity: not more than 70% 3. Cooling water inlet temperature: not higher than 25℃ 4. Cooling water qu...
What are the commonly used coatings for vacuum plating？
Jan 24,2022
Commonly used coatings for vacuum plating include UV-curable coatings, acrylic coatings, alkyd resin coatings, epoxy resin coatings, and polyurethane coatings.(1) UV curing coating:UV-curable coatings...
What are the requirements for coatings in vacuum plating？
Jan 20,2022
Due to the development of bottom and top coating materials, the continuous improvement, continuous and large-scale vacuum coating equipment, vacuum coating has entered the industrialized production st...

Web Menu

Product Search

Language

Exit Menu

News

News categories

Product

RECENT POSTS

What are the factors affecting target poisoning in magnetron sputtering

Application of Vacuum PVD Coating Technology in Die Casting Mould

Share the functions and features of coating machine extrusion coating technology

Analysis of common defects in coating（2)

Analysis of common defects in the coating(1)

Ten Problems in PVD Coating Processing (Part 2)

Ten Problems in PVD Coating Processing (Part 1)

How to use vacuum coating equipment correctly?

What is the difference between evaporative coating and sputtering coating？

What are the normal working conditions and maintenance methods of vacuum coating equipment？

What are the commonly used coatings for vacuum plating？

What are the requirements for coatings in vacuum plating？

Quick Link

Product

Detailed information