Coating machine is a kind of production equipment mainly used for surface coating processes such as film and paper, which brings convenience to people's coating production. Its winding and unwinding are equipped with a full-speed active film splicing mechanism for use. Moreover, this operation and the tension closed loop can actively control the operation of the coating equipment, so the operation is very simple during use. The tactile film coating machine consists of four main systems: parent roll conveying system, coating system, heating and drying system, and cooling system. What are their functions? The following editor will analyze with you:
Parent roll conveying system: single station lifting and unwinding method, equipped with two 3-inch convex key air expansion shafts, 5kg magnetic powder brake to control the unwinding tension, the whole frame of the touch-sensitive film coating machine adopts epc hydraulic automatic correction and pneumatic film connection mechanism , To ensure that the machine runs stably during the unwinding process to improve production efficiency.Bearing transmission hard vacuum coating machine
Coating system: The touch-sensitive film coating machine adopts anilox roller coating method (positive pressure and anti-friction adhesive coating methods), equipped with 4 anilox rollers, glue level control system, double-sided scraper, aluminum alloy platen And transition rollers and other equipment. The movement type is a rubber roller. The demoulding and glue leveling are controlled by an air cylinder, which moves up and down and has protection. The air pressure can be adjusted and controlled by a solenoid valve.
Heating and drying system: The touch-sensitive film coating machine adopts heating methods such as electricity, hot air, steam, and heat transfer oil. The inner and outer walls and the wind deflector are made of cold-rolled plates; the nozzle is made of cold-rolled plates and made of white galvanized. The ultra-fine glass wool filled with 80mm trenches can maintain the temperature at 105-115 degrees Celsius to ensure that the coating meets the process requirements.
Cooling system: hard chrome-plated cooling roller, used for cooling and forming the tape, and equipped with a power roller, surface knurled Teflon coating, curved spreading roller made of nitrile rubber and aluminum transition roller alloy. The touch film coating machine is equipped with epc hydraulic grounding hole correction device and other devices to ensure that the winding is neat and beautiful.
No. 79 West Jinniu Road,
Ningbo City, Zhejiang Provice, China