Thermal Evaporation PVD Coating Machine

-- Steady & Reliable Manufacturer --

Introduction

A Thermal Evaporation PVD Coating Machine creates brilliant, mirror-like metallic layers by heating pure evaporation wire, pellets or slugs inside a high-vacuum chamber until the metal melts, wets a refractory source and vaporises onto rotating workpieces. At Ningbo Danko Vacuum Technology Co., Ltd., we manufacture these high-throughput evaporation coaters in Yuyao, Ningbo, building on vacuum equipment expertise established in 2007 under the former name Huahong Vacuum Technology.

Compared with cathodic arc or magnetron sputtering, resistance thermal evaporation delivers the fastest cycle times and lowest cost per piece for bright reflective finishes on plastics, glass, ceramics and stamped metals. High-purity aluminium wire fed continuously onto resistance-heated tungsten filaments or intermetallic boron-nitride/titanium-diboride (BN/TiB₂) evaporation boats flashes into vapour within seconds once the chamber reaches high vacuum. Because the vapour travels in straight lines with minimal thermal radiation during the brief 10-to-30-second flash step, heat-sensitive ABS, PS, PP and PC mouldings stay cool and distortion-free.

Our thermal evaporation machines are built in horizontal front-loading cylindrical chambers—ideal for rolling planetary rack carts straight in and out on floor rails—as well as vertical bell-jar and roll-to-roll web formats. To handle the outgassing typical of injection-moulded plastics and UV basecoats, Danko equips these systems with high-capacity rotary-piston or rotary-vane roughing pumps, large Roots boosters, high-speed oil diffusion pumps and optional cryogenic Meissner water-vapour traps that pull chambers down to working pressure in just a few minutes.

While aluminium is the workhorse evaporant for bright silver-chrome reflectance, the same chamber can evaporate copper, tin, indium, silver, gold or Nichrome alloys using dedicated tungsten coils, molybdenum boats or alumina-lined crucibles, and can apply silicon-monoxide (SiO) or HMDSO plasma-polymerized protective topcoats in the very same pump-down.

Designed and built in-house by our team of around ninety engineers and technicians, every Danko thermal evaporator is leak-checked and test-run with planetary racks before leaving Yuyao. Each unit includes baseline evaporation recipes, a free 12-month warranty on the complete equipment, onsite installation and operator training, and long-term supply of tungsten filaments, evaporation boats, aluminium wire and vacuum spares at reduced prices.

Specification

Thermal evaporation machines are sized primarily around rack loading capacity, outgassing load from plastic or lacquered substrates, and desired batches per hour. The table below outlines our standard horizontal and vertical configurations built in Yuyao.



Item Typical Configuration Notes
Evaporation Method Resistance thermal evaporation via tungsten filaments or ceramic/refractory boats Optional electron-beam gun or induction crucible for high-melting-point materials.
Chamber Geometry Horizontal cylindrical chamber (Ø1,000–2,200 mm) or vertical bell/box chamber Horizontal layout supports dual interchangeable planetary trolleys for non-stop loading.
Chamber Construction 304 stainless steel inner shell with water-cooled jacket and hinged full-bore door Removable stainless steel inner liners simplify periodic aluminium build-up stripping.
Evaporation Sources 12 to 48 high-current tungsten helical filaments or BN/TiB₂ evaporation boats Arranged along central busbars or multi-zone banks for uniform coverage on 3D racks.
Wire Feed System Multi-channel stepper-driven continuous aluminium/metal wire feeders (optional) Extends boat life to 300+ cycles without breaking vacuum to reload wire clips.
Evaporant Materials High-purity Al (99.99%), Cu, Sn, In, Ag, Au, NiCr and SiO Coil, boat or crucible type is matched to wetting behaviour of each evaporant.
Evaporation Power Low-voltage, high-current SCR/IGBT transformer banks (typically 15–60 kVA) Programmable ramp-soak-flash current profile prevents wire spitting and pinholes.
Pumping Group Rotary piston/vane roughing pump + large Roots blower + 1 or 2 oil diffusion pumps High pumping speed handles heavy water-vapour outgassing from moulded plastics.
Polycold Trap Optional cryogenic Meissner water-vapour trap (-110 °C to -135 °C) Cuts pump-down time by 40%–60% in humid climates and boosts mirror brightness.
Ultimate & Work Vacuum Ultimate 3 x 10⁻³ Pa; evaporation initiated at 2 x 10⁻² to 5 x 10⁻² Pa Fast crossover valves allow diffusion pumps to stay hot and ready between cycles.
Glow & Topcoat Unit High-voltage DC/AC glow discharge bar + PECVD HMDSO monomer dosing line Plasma cleaning improves adhesion; HMDSO topcoat protects Al against tarnish.
Planetary Fixtures 6, 8, 10 or 12 satellite spindles with variable-speed revolution and self-rotation Trolley-mounted racks enable outside-chamber loading while another batch runs.
Film Thickness 40 nm to 150 nm opaque reflective layers, or controlled semi-transparent tints Crystal quartz monitor or timed current-integral control ensures batch repeatability.
Cycle Time 8 to 18 minutes per batch (with Polycold and pre-dried parts) Supports 3 to 6 batches per hour for high-volume cosmetic and automotive lines.
Control System PLC with colour HMI, automatic pump sequencing and current-ramp recipes Full valve interlocks protect diffusion pumps from accidental air-inrush oxidation.
Warranty & Consumables 12-month free warranty on complete equipment; long-term discounted spares Filaments, BN/TiB₂ boats, Al wire and seals stocked for fast dispatch.

Share your part dimensions, substrate resin or glass type, and required pieces per hour. We will calculate spindle pitch, chamber diameter and pumping capacity before issuing a confirmed specification sheet.

Application

Thermal evaporation is the industry benchmark wherever high-volume consumer, automotive or packaging parts need a bright, mirror-chrome or coloured metallic finish at low unit cost. Typical production applications for Danko thermal evaporators include the following.

  • Automotive headlamp reflectors and bezels. BMC, PC and PBT headlamp reflectors, fog-light housings and interior trim bezels receive high-reflectivity aluminium coatings followed by an in-chamber HMDSO plasma-polymerized protective layer.

  • Cosmetic packaging and perfume caps. ABS, PP and Surlyn lipstick tubes, cream jars, spray collars and bottle caps gain brilliant silver, gold, rose gold or rainbow finishes (achieved via tinted UV topcoats over bright evaporated aluminium).

  • Glassware, crystal and lighting bulbs. Perfume bottles, wine glasses, Christmas ornaments, chandelier parts and automotive/led lamp reflectors are coated in high-capacity planetary racks with uniform 360-degree coverage.

  • Appliance trims and emblems. Washing-machine dials, refrigerator handles, TV bezels and brand nameplates achieve a bright chrome look without the environmental hazards of hexavalent chromium electroplating.

  • Footwear heels, trophies and toys. Injection-moulded ABS/PS shoe heels, award trophies, fashion buttons and toy components run in fast 10-to-15-minute batches for high daily piece counts.

  • EMI/RFI shielding on electronics enclosures. Copper or aluminium evaporated layers inside plastic medical and industrial housings block electromagnetic interference while keeping weight low.

  • Flexible packaging and capacitor films. Roll-to-roll thermal evaporators deposit continuous aluminium barrier layers onto BOPP, PET and CPP webs at high web speeds for snack packaging and metallized film capacitors.

In commercial plastic metallizing, the vacuum chamber works hand-in-hand with upstream UV basecoating and downstream UV topcoating. The UV basecoat levels micro-roughness on injection-moulded ABS or PP and seals out plasticizers, while the UV topcoat adds abrasion resistance and lets a single silver aluminium evaporation run produce gold, bronze, blue or smoke-chrome shades simply by tinting the clear lacquer.

For automotive reflectors that must pass high-humidity and salt-spray tests without an organic topcoat, Danko integrates an in-situ HMDSO monomer dosing system: immediately after aluminium evaporation, an RF or pulsed-DC plasma polymerizes a transparent 30–50 nm organosilicon barrier film onto the reflector before the door opens.

Send our Yuyao engineering team sample mouldings or glass pieces—we can test your substrate outgassing, verify UV primer compatibility and provide sample coated parts for your customer sign-off.

Advantage

When throughput, mirror reflectance and consumable economy drive the business case, resistance thermal evaporation outperforms every other PVD method. Customers select Danko thermal evaporation systems for several concrete operational strengths.

  • Ultra-fast batch cycles. With high-capacity Roots-diffusion pumping and an optional Polycold water-vapour trap, pump-down, glow clean and aluminium flash take just 8 to 18 minutes, delivering up to 4–5 loads per hour.

  • Lowest consumable cost per part. High-purity aluminium wire and tungsten filaments cost a fraction of machined magnetron sputtering targets, making thermal evaporation unbeatable for mass-market caps, trims and reflectors.

  • Minimal heat load on plastics. Because evaporation lasts only seconds and lacks sustained plasma bombardment, heat-sensitive ABS, PS, PP and thin-wall PET parts stay well below their softening point.

  • Programmable multi-step current ramp. Our SCR/IGBT power supplies execute a gentle pre-melt wetting ramp before flashing, eliminating molten aluminium spitting that otherwise causes pinholes and hazy spots.

  • Dual-trolley non-stop workflow. Horizontal chambers include two wheeled planetary carts—operators load and unload Cart B on the shop floor while Cart A is coating inside the chamber, keeping vacuum uptime near 90%.

  • Integrated glow clean & HMDSO topcoat. Built-in plasma pre-treatment and optional organosilicon protective topcoating run automatically inside the same PLC recipe without extra handling.

  • Direct factory support & spares. Built in-house by Ningbo Danko's 90-person team, every machine comes with a 12-month free warranty, onsite training and long-term discounted filaments, boats and seals.

Maintenance downtime is also kept short. Removable stainless steel chamber liners catch overspray aluminium so operators can lift out dirty liners, drop in a clean spare set and resume production in under thirty minutes, stripping the used liners offline.

Replacing wet chrome electroplating with thermal evaporation also removes hexavalent chromium wastewater treatment, cyanide baths and hazardous-waste disposal fees—often paying back the vacuum equipment investment within 12 to 18 months on mid-size cosmetic or automotive lines.

When comparing thermal evaporators across suppliers, check actual diffusion pump throughput, Polycold coil surface area and busbar current balancing—these determine whether every spindle from front to back of a 2-metre chamber gets the same mirror brightness.

Ningbo Danko Vacuum Technology Co., Ltd. Since 2020

Founded in 2007 as previous name Huahong Vacuum Technology, is a nationwide renowned PVD vacuum coating system manufacturer and vacuum coating technology developer, including but not limited to Sputtering Systems, Optical Coating Units, Batch Metallizers, Physical Vapor Deposition (PVD) Systems, Hard and Wear Resistant Vacuum Coating Deposition Equipment, Glass, PE, PC Substrate Coaters, Roll-to-Roll Machines for coating flexible substrates. The machines are used for a wide range of applications described below (but not limited to) Automotive, Decorative, Hard coatings, Tool & Metal Cutting coatings, and thin film Coating applications for industrial and Laboratories including Universities.
Danko Vacuum Technology Co., Ltd is committed to expanding our market boundaries by providing high-quality, high-performance vacuum coating equipment. Our Company is highly focused on after-sales service in Domestic and International markets, providing accurate part processing plans and professional solutions to meet customers' needs.
Ningbo Danko Vacuum Technology Co., Ltd.
Message Feedback