Automatic PVD Coating Machine

-- Steady & Reliable Manufacturer --

Introduction

An Automatic PVD Coating Machine relies on advanced PLC automation, industrial SCADA software, closed-loop sensor feedback and motorized process interlocks to execute multi-step vacuum deposition cycles—from rough pump-down and plasma glow-cleaning to gas injection, sputtering/evaporation and venting—with zero manual intervention between batches. At Ningbo Danko Vacuum Technology Co., Ltd., we engineer and manufacture fully automated PVD systems in Yuyao, Ningbo, building on vacuum equipment manufacturing experience established in 2007 under our former name Huahong Vacuum Technology.

In high-volume manufacturing plants, human error remains the leading cause of batch rejections, colour drift, pump contamination and equipment downtime. When operators must manually switch roughing valves, adjust mass flow controllers, time heating stages or judge arc suppression by eye, consistency suffers across shifts. Danko automated PVD systems replace operator guesswork with pre-programmed, recipe-locked automation suites. Once an operator loads the fixture cart and presses start, the machine manages pump cross-over timing, substrate heating ramps, ion-source bombardment, target power integration, reactive gas partial-pressure feedback and cooling cycles automatically.

Our automated coaters are built across multi-arc, magnetron sputtering, hybrid and thermal evaporation chamber formats. Each system features industrial-grade touchscreens, redundant safety interlocks (protecting against cooling water failure, compressed air loss or vacuum breaches), and data-logging software that records every process parameter—voltage, current, chamber pressure, gas flow and substrate temperature—for full batch traceability and ISO/IATF quality audits.

Whether deployed on decorative sanitary hardware, automotive lighting reflectors, cutting tools or electronic components, automation ensures that batch 500 of the month matches batch one in thickness, hardness and colour.

Designed and fabricated in-house by our team of approximately ninety engineers and technicians, every automatic Danko machine undergoes full automated dry-cycle and live-run testing in Yuyao before shipment, delivered with starting recipes, a free 12-month complete equipment warranty, onsite installation and operator training, and long-term supply of targets, valves and vacuum spares.

Specification

Automatic PVD coating systems are configured around your chosen deposition technology (multi-arc, sputtering or evaporation) and plant automation level. The table below outlines our standard automated Yuyao production build.



Item Typical Configuration Notes
Automation Level Full auto (one-button start) with semi-auto and manual maintenance modes Recipe locks prevent unauthorized parameter changes by shift operators.
PLC & HMI System Siemens / Mitsubishi industrial PLC + 15-inch color touchscreen HMI Multi-level password protection for operators, process engineers and administrators.
Process Control Closed-loop mass flow controllers (MFC), throttle valves and pressure/power integration Maintains stable reactive gas partial pressure and target power throughout growth.
Data Logging & QA Real-time SCADA data logging with USB/Ethernet batch export and CSV logging Records voltage, current, pressure and temperature per batch for ISO/IATF traceability.
Safety Interlocks Hardware & software interlocks for cooling water, air pressure, vacuum & overtemp Instantly safe-guards diffusion pumps and power supplies during utility interruptions.
Chamber Structure Vertical or horizontal stainless steel vessel with water-cooled double wall Electropolished interior walls reduce outgassing and speed up automated pump-down.
Deposition Sources Multi-arc cathodes, magnetron sputtering targets or thermal evaporation sources Configured according to whether the line runs decorative, tool or web coatings.
Pumping Train Automatic pneumatic valve sequencing: roughing, Roots, holding and high vacuum PLC monitors crossover pressures to prevent oil backstreaming or pump stalling.
Substrate Motion Programmable servo-driven planetary rotation or web winding with speed control Rotation speed and reversing intervals are stored directly inside the coating recipe.
Recipe Capacity Storage for 100+ named recipes (TiN, CrN, ZrN, Black, Gold, Custom stacks) New recipes can be created, edited and uploaded via USB or network.
Diagnostic Tools Built-in alarm history log, I/O status monitor and maintenance timer alerts Reminds maintenance staff when pump oil, seals or target life reach service intervals.
Utilities 3-phase 380 V 50 Hz, chilled water, clean dry compressed air and process gases Customizable electrical voltage and frequency to match destination country.
Warranty & Spares 12-month free warranty on complete equipment; long-term discounted consumables Includes remote diagnostic support, onsite installation and operator training.

Share your part category, target coatings and expected daily batch count, and our automation engineers will propose the optimal PLC architecture and sensor package.

Application

Automated PVD coating machines are deployed wherever batch-to-batch repeatability, traceability and high daily uptime are non-negotiable. Across our customer installations, automated systems serve the industries below.

  • Automotive Tier-1 components. Headlamp reflectors, brake pistons, transmission gears and exterior chrome trim requiring rigorous IATF 16949 process logging and zero colour drift across multi-shift production.

  • Sanitary hardware and luxury plumbing. Faucets, shower mixers and door levers produced in large daily quantities where strict $\Delta E$ colour tolerances between batches are mandatory.

  • Cutting tools, drills and indexable inserts. High-hardness TiAlN and AlCrN coatings applied to carbide cutting tools where automated pre-cleaning, heating and bias integration ensure consistent tool life.

  • Medical instruments and surgical implants. Clean, biocompatible TiN and ZrN coatings requiring full batch data records and strict sterilization compatibility.

  • Consumer electronics and watch manufacturing. Smartphone frames, watch bezels and jewelry requiring flawless scratch-resistant gold, rose gold and black finishes across thousands of identical units.

  • Contract coating service bureaus. Job-shop coaters running mixed daily orders who benefit from 100+ stored recipes so operators can switch from gold bathroom hardware to grey tool coatings with one screen tap.

  • High-speed packaging and web coating lines. Continuous roll-to-roll and PET film coaters requiring automated tension, speed and coating-thickness feedback loops.

In high-turnover factories, training new shift operators can be a bottleneck. Danko’s graphical HMI interface uses intuitive step-by-step animations and status indicators. Operators only need to mount the fixture cart, check raw material levels and press "Auto Start." The PLC blocks improper commands—such as opening high-vacuum valves before roughing pressure is reached—preventing costly operator errors.

Furthermore, built-in maintenance timers track pump operating hours, chamber run cycles and target erosion percentages, prompting technicians to perform preventive maintenance before unexpected faults halt production.

Send our Yuyao engineering team your factory’s quality reporting requirements—we can customize data-export formats to integrate directly with your plant MES or ERP database.

Advantage

Automation transforms a complex vacuum machine into a reliable, repeatable production tool. Manufacturers choose Danko automatic PVD systems for several distinct operational benefits.

  • Zero operator error & batch drift. Recipe-locked PLC automation eliminates manual valve timing and guesswork, ensuring batch 100 looks and performs exactly like batch 1.

  • Full ISO/IATF batch traceability. Real-time SCADA logging records pressure, temperature, voltage and gas flow into exportable CSV files, satisfying strict automotive and medical quality audits.

  • Comprehensive hardware/software safety interlocks. Redundant sensors monitor cooling water, air pressure, vacuum levels and cabinet temperatures, instantly safeguarding pumps and power supplies during emergencies.

  • One-touch recipe switching. Store over 100 named recipes for gold, rose gold, black, TiAlN or CrN, allowing operators to change production lines in seconds with zero reprogramming.

  • Smart preventive maintenance alerts. Built-in runtime counters notify maintenance staff when roughing pump oil, mechanical seals or targets require servicing, avoiding unexpected downtime.

  • In-house PLC & software engineering. Built by Ningbo Danko's 90-person technical team, our control logic is custom-tailored for vacuum physics rather than adapted from generic factory automation software.

  • 12-month warranty & remote diagnostic support. Backed by a free 12-month complete equipment warranty, remote Ethernet troubleshooting, onsite installation and operator training.

Operating labour costs also drop significantly: a single trained operator can easily manage two or three automated PVD systems simultaneously, loading one fixture cart while the adjacent machine runs its automated cycle.

Remote diagnostic capability allows Danko service engineers in Yuyao to log into the PLC via secure Ethernet connection to review alarm histories and assist your technicians in real time, minimizing overseas travel delays.

When comparing automated PVD quotes, verify PLC brand redundancy, HMI recipe capacity and whether data logging is included as standard or offered as an expensive software addon.

Ningbo Danko Vacuum Technology Co., Ltd. Since 2020

Founded in 2007 as previous name Huahong Vacuum Technology, is a nationwide renowned PVD vacuum coating system manufacturer and vacuum coating technology developer, including but not limited to Sputtering Systems, Optical Coating Units, Batch Metallizers, Physical Vapor Deposition (PVD) Systems, Hard and Wear Resistant Vacuum Coating Deposition Equipment, Glass, PE, PC Substrate Coaters, Roll-to-Roll Machines for coating flexible substrates. The machines are used for a wide range of applications described below (but not limited to) Automotive, Decorative, Hard coatings, Tool & Metal Cutting coatings, and thin film Coating applications for industrial and Laboratories including Universities.
Danko Vacuum Technology Co., Ltd is committed to expanding our market boundaries by providing high-quality, high-performance vacuum coating equipment. Our Company is highly focused on after-sales service in Domestic and International markets, providing accurate part processing plans and professional solutions to meet customers' needs.
Ningbo Danko Vacuum Technology Co., Ltd.
Message Feedback