DLC PVD Coating Machine

-- Steady & Reliable Manufacturer --

Introduction

A DLC (Diamond-Like Carbon) PVD Coating Machine deposits amorphous carbon thin films that combine extreme hardness, ultra-low friction coefficients, high wear resistance, and chemical inertness onto precision mechanical components, automotive parts, cutting tools, and medical devices. At Ningbo Danko Vacuum Technology Co., Ltd., we design and manufacture industrial DLC coating systems in Yuyao, Ningbo, building on vacuum equipment engineering experience established in 2007 under our former name Huahong Vacuum Technology.

Diamond-Like Carbon (DLC) coatings represent the pinnacle of advanced tribological surface engineering. By combining physical vapour deposition (PVD) magnetron sputtering (using high-purity graphite targets) with plasma-assisted chemical vapour deposition (PACVD) hydrocarbon gas injection (such as acetylene or methane), Danko DLC systems deposit hydrogenated (a-C:H) or hydrogen-free amorphous carbon films. These coatings achieve Vickers hardness values between 2,000 and 4,000 HV and friction coefficients as low as 0.05 against steel, dramatically outperforming conventional hard chromium or nitrided surfaces under dry or starved-lubrication conditions.

Danko builds DLC coaters with vertical stainless steel chambers equipped with high-density unbalanced magnetron (UBM) graphite cathodes, pulsed-DC or high-power impulse magnetron sputtering (HiPIMS) power supplies, and high-voltage substrate bias generators (up to 3,000 V) required for graded adhesion interlayer formation (such as Ti-TiC-DLC). The pumping group utilizes clean turbomolecular pumps and dry roughing pumps to ensure freedom from hydrocarbon backstreaming during film growth.

Applications span automotive fuel injection components, piston pins, tappets, textile machinery guides, high-end mechanical bearings, precision injection moulds, and wear-resistant consumer goods.

Engineered and fabricated in-house by our team of approximately ninety engineers and technicians in Yuyao, every DLC coating machine undergoes strict vacuum and coating testing prior to dispatch, backed by a free 12-month complete equipment warranty, onsite installation and operator training, and long-term discounted supply of graphite targets and vacuum spares.

Specification

DLC PVD coating systems are engineered around tribological performance requirements, substrate materials, and batch throughput. The table below outlines our standard industrial DLC build in Yuyao.


Item Typical Configuration Notes
Deposition Technology Hybrid Unbalanced Magnetron (UBM) Sputtering + PACVD Hydrocarbon Gas Injection Combines graphite sputtering with acetylene/methane plasma for dense a-C:H films.
Chamber Architecture Vertical cylindrical double-wall vessel in 304 stainless steel with water cooling Electropolished interior walls reduce outgassing and ensure high vacuum purity.
Chamber Diameters Standard diameters from 700 mm to 1,500 mm; custom heights on request Optimized for dense loading of automotive parts, mechanical components, and tools.
Graphite Cathodes 2 to 6 planar or rotary magnetron cathodes fitted with high-purity graphite targets High-density UBM magnetic arrays maximize ion bombardment and deposition rate.
Power Supplies Pulsed DC magnetron power + HiPIMS option + high-voltage pulsed bias supply High-voltage bias (up to 3,000 V) creates graded metallic-to-carbon adhesion interlayers.
Pumping Group Dry screw or rotary roughing pump + Roots blower + high-speed turbomolecular pump Clean oil-free turbomolecular pumping prevents polymer contamination during PACVD.
Ultimate Vacuum Typically better than 8 x 10⁻⁴ Pa in a clean, dry chamber Ultra-high vacuum purity is essential for low-friction tribological film growth.
Substrate Heating Radiant resistance heaters with working temperatures up to 450 °C Outgasses parts and promotes strong metallurgical bonding at the interface.
Fixture System Planetary multi-axis rotation carousel with variable speed drive Specialized jigs designed for pins, tappets, gears, valves, and precision tools.
Process Gases Mass flow controlled channels for Argon, Acetylene (C₂H₂), Methane (CH₄), and Nitrogen Precise flow control regulates film hardness, residual stress, and hydrogen content.
Film Thickness & Hardness Thickness 1 to 4 µm; Vickers Hardness 2,000–4,000 HV; friction coeff. 0.05–0.10 Delivers exceptional wear resistance and dry-running anti-friction performance.
Control System PLC with touchscreen HMI, recipe storage, and automated vacuum sequencing Fully automates pump-down, etching, gradient interlayer growth, and DLC deposition.
Utilities 3-phase 380 V 50 Hz, chilled cooling water loop, and compressed air Electrical and gas safety interlocks ensure secure factory operation.
Warranty & Support 12-month free warranty on complete equipment; long-term spare parts supply Includes starting recipes, onsite installation, operator training, and lifelong support.

Send us your substrate material, component drawings, and friction/wear test specifications. Our engineers will model the UBM cathode layout and interlayer recipe before confirming specifications.

Application

Diamond-Like Carbon (DLC) coatings are specified wherever moving mechanical parts suffer from high friction, scuffing, adhesive wear, or starved lubrication. Key applications include:

  • Automotive fuel injection components. Fuel injector needles, pump plungers, and common-rail components operating under extreme pressures with low-lubricity fuels.

  • Valvetrain and engine friction reduction. Piston pins, valve tappets, camshaft followers, and piston rings coated with a-C:H layers to reduce parasitic engine friction and wear.

  • Precision mechanical bearings and shafts. High-speed spindle bearings, roller bearings, and precision shafts requiring anti-seizure protection and low starting torque.

  • Textile machinery guides and needles. Looper needles, yarn guides, and winding pins coated with DLC to prevent friction-induced yarn breakage and machine wear.

  • Stamping dies and plastic injection moulds. Punches, forming dies, and mould cores treated with DLC to eliminate galling, ease part release, and extend maintenance intervals.

    Medical instruments and surgical blades. Surgical scalpels, orthopaedic joint components, and guide wires benefiting from bio-inert, ultra-low friction surfaces.

The success of DLC coatings on high-stress steel components relies heavily on the graded interlayer. Because amorphous carbon has high residual compressive stress, Danko’s DLC machines automatically deposit a multi-stage interlayer—starting with a chromium or titanium etch, followed by a metal-carbon gradient (Ti-TiC or Cr-CrC)—before transitioning to pure DLC. This prevents delamination even under heavy impact loads.

Send our Yuyao engineering team your component wear test data and operating loads—we will design the optimal interlayer recipe and fixture layout for your parts.

Advantage

DLC PVD coating machines demand precise control over magnetron sputtering power, hydrocarbon gas injection, and substrate bias voltage. Manufacturers choose Danko DLC systems for several distinct engineering advantages:

  • Extreme hardness & ultra-low friction. Produces dense a-C:H films with 2,000–4,000 HV hardness and friction coefficients down to 0.05, slashing energy loss and wear.

  • Graded interlayer for zero delamination. High-voltage pulsed bias and automated gas ramping create robust metal-to-carbon gradient interlayers that prevent film peeling under heavy load.

  • High-density UBM cathode efficiency. Unbalanced magnetron graphite sources maximize ionization rates, increasing film density and deposition speed.

  • Clean oil-free vacuum integrity. High-speed turbomolecular pumping trains ensure zero hydrocarbon backstreaming during sensitive PACVD hydrocarbon gas phases.

  • Fully automated recipe control. PLC touchscreen software automates pump-down, ion cleaning, interlayer staging, and hydrocarbon gas injection for consistent batch quality.

  • In-house manufacturing excellence. Built entirely by Ningbo Danko's 90-person technical team, ensuring seamless integration of power supplies, gas manifolds, and chamber mechanics.

  • 12-month warranty & technical backing. Backed by a free 12-month complete equipment warranty, onsite commissioning, operator training, and lifelong spare parts supply.

Maintenance planning is built into the chamber design: removable stainless steel shields catch carbon overspray, allowing technicians to clean the interior quickly and maintain clean vacuum conditions.

Safety interlocks monitor explosive gas lines (acetylene/methane) with automated nitrogen purge valves and flame arrestors, ensuring absolute safety for plant operators.

When comparing DLC coating machine proposals, inspect bias voltage range, turbo pump capacity, and gas safety interlock architecture to ensure professional tribological performance.

Ningbo Danko Vacuum Technology Co., Ltd. Since 2020

Founded in 2007 as previous name Huahong Vacuum Technology, is a nationwide renowned PVD vacuum coating system manufacturer and vacuum coating technology developer, including but not limited to Sputtering Systems, Optical Coating Units, Batch Metallizers, Physical Vapor Deposition (PVD) Systems, Hard and Wear Resistant Vacuum Coating Deposition Equipment, Glass, PE, PC Substrate Coaters, Roll-to-Roll Machines for coating flexible substrates. The machines are used for a wide range of applications described below (but not limited to) Automotive, Decorative, Hard coatings, Tool & Metal Cutting coatings, and thin film Coating applications for industrial and Laboratories including Universities.
Danko Vacuum Technology Co., Ltd is committed to expanding our market boundaries by providing high-quality, high-performance vacuum coating equipment. Our Company is highly focused on after-sales service in Domestic and International markets, providing accurate part processing plans and professional solutions to meet customers' needs.
Ningbo Danko Vacuum Technology Co., Ltd.
Message Feedback