Specification
PET film coaters differ significantly depending on whether the line produces optical/window films (requiring multi-cathode MF/DC sputtering on 23–188 µm optical PET) or high-speed packaging/decorative webs (requiring wire-fed boat evaporation on 8–50 µm BOPET). The table below summarizes our standard Yuyao builds.
| Item | Typical Configuration | Notes |
|---|---|---|
| Target Substrate | BOPET, optical-grade PET, hard-coated PET and release-coated PET webs | Tuned for gauges from 6–12 µm packaging film up to 188 µm window/display film. |
| Coating Widths | Standard 600 mm, 1,050 mm, 1,350 mm, 1,600 mm and 1,850 mm | Matches standard 50-inch, 60-inch and 72-inch commercial PET master roll widths. |
| Deposition Sources | 4 to 10 DC/MF planar or rotary magnetron cathodes, or multi-boat Al wire evaporators | Supports multi-layer dielectric/metal/dielectric solar stacks in one pass. |
| Coating Materials | Al, Ag, Au, Ti, Cr, NiCr, Cu, ITO, TiO₂, Nb₂O₅, AlOₓ and SiOₓ | Covers IR-rejecting window film, transparent barrier, ITO conductive & bright mirror PET. |
| Web Transport Mode | Precision chilled-drum contact or ultra-clean free-span transport (optical grade) | Free-span option avoids back-side drum contact scratches on optical PET. |
| Chilled Drum Specs | Ø500–800 mm mirror-chrome drum, TIR runout ≤0.01 mm, chilled -15 °C to +20 °C | Eliminates thermal shrinkage ripples and longitudinal "light lines" on thin BOPET. |
| Tension & Spreading | 4-zone servo load-cell tension control + precision bowed expander rollers | Prevents air-entrapment creases and telescoping on smooth, low-friction optical PET. |
| Plasma & Static Unit | In-vacuum Ar/O₂ glow-discharge treater + active vacuum static eliminator bars | Boosts metal/oxide adhesion on untreated PET and stops static pinholes at rewind. |
| Roll Capacity | Max OD 600–800 mm (up to 6,000–12,000 linear metres depending on film gauge) | 6-inch (152 mm) core chucks standard; 3-inch adapter shafts available. |
| Line Speed | 1–25 m/min (multi-layer optical sputtering); 120–450 m/min (Al boat metallizing) | Automatic speed-to-power ramping keeps film properties uniform during acceleration. |
| Chamber & Pumping | Two-zone differentially pumped vessel with dry/Roots + turbomolecular or diffusion pumps | Includes dual -125 °C Polycold coils in winding zone for rapid PET moisture removal. |
| Base Vacuum | Empty 1.5 x 10⁻³ Pa; loaded PET jumbo roll pumped to 2 x 10⁻² Pa in 15–22 min | Low residual water partial pressure prevents silver oxidation and oxide haze. |
| Inline Optical/Ohm QA | Traversing spectrophotometer / OD monitor + non-contact sheet-resistance sensor | Measures VLT%, IR rejection, L*a*b* colour or Ω/sq continuously across roll width. |
| PLC & Data Logging | Industrial PLC + PC SCADA logging roll map, tension, vacuum and VLT/Ω/sq curves | Generates per-roll QA certificates for window-film, electronics and packaging buyers. |
| Site Utilities | 3-phase 380 V 50 Hz (customizable), dual-loop chillers, clean dry air & N₂ purge | Cleanroom-compatible roll-out carriage option for optical-grade PET lines. |
| Warranty & Support | 12-month free warranty on complete equipment; long-term discounted consumables | Includes onsite installation, web-threading commissioning and discounted targets/boats. |
Send us your PET roll width, thickness range, target VLT%/IR-rejection, sheet resistance or barrier OTR/WVTR spec, and monthly output. Our engineers will configure the exact cathode/boat zones and chiller sizing.
Application
Coated PET film serves an extraordinary range of architectural, electronic, packaging and energy-storage products—each demanding a different balance of optical clarity, electrical conductivity, barrier density or surface reflectance. Danko PET film PVD coaters are engineered for the applications below.
-
Automotive and architectural solar-control window films. Multi-cathode sputtered PET coaters deposit dielectric/silver/dielectric (single- or double-Ag) and titanium/NiCr stacks on 23–50 µm optical PET, blocking >90% infrared solar heat while maintaining high visible light transmission (VLT) and neutral colour.
-
High-barrier transparent and metallized food packaging. 12 µm BOPET coated with dense aluminium (optical density 2.0–3.0) or transparent reactive AlOₓ/SiOₓ layers delivers ultra-low oxygen (OTR) and moisture (WVTR) transmission for retort pouches, coffee bags and dry-food laminates.
-
Transparent conductive ITO and metal-mesh PET films. Low-temperature sputtered indium-tin-oxide (ITO) and copper-seed films on 50–188 µm hard-coated optical PET power capacitive touch screens, flexible displays, transparent heaters and PDLC smart switchable films.
-
Composite lithium-ion battery current collectors (PP/PET-Cu & PET-Al). Double-sided vacuum deposition of pure copper or aluminium onto ultra-thin 4.5–8 µm PET webs creates lightweight, nail-penetration-safe composite foils for next-generation EV batteries.
-
Decorative transfer, hot-stamping and holographic PET foils. Release-coated PET webs receive mirror-bright aluminium, chrome, gold or copper coatings for luxury packaging stamping, security holograms and metallic yarn slitting.
-
Reflective backlighting and LED diffusion reflectors. White or clear PET coated with high-reflectance silver or aluminium boosts luminance efficiency inside LCD backlight units and commercial LED luminaires.
-
Protective surface-shield and EMI-shielding PET tapes. Thin sputtered stainless steel, copper or NiCr coatings on adhesive-grade PET provide antistatic and electromagnetic interference shielding for smartphones and EV electronics.
For optical-grade PET window and touch-sensor films where even microscopic drum-contact scratches are unacceptable, Danko offers a free-span or edge-supported transport path through the sputtering zone, backed by inline optical spectrophotometry that tracks L*a*b* colour and VLT% continuously from start to end of a 6,000-metre jumbo roll.
When running untreated BOPET for packaging or industrial laminates, our in-vacuum oxygen/argon plasma pre-treater raises surface energy immediately prior to metallizing, ensuring strong metal-to-PET bond strength that resists delamination during downstream extrusion or adhesive lamination.
Send our Yuyao lab sample rolls of your base PET film along with your optical, electrical or peel-strength specification—we can run pilot coatings and return measured VLT, sheet-resistance and adhesion data.
Advantage
Producing defect-free coated PET requires tight control over heat transfer, web tension and water-vapour partial pressure. Danko builds dedicated mechanical and vacuum features into our PET film coaters to eliminate the common failure modes of polyester web coating.
-
Eliminates thermal shrinkage & "light lines". High-capacity sub-zero chilled coating drums (-15 °C to +20 °C) paired with precision bow rollers keep thin BOPET flat against the drum face, preventing localized thermal buckling and longitudinal uncoated streaks.
-
Optical-grade scratch-free web handling. Ultra-smooth mirror-polished guide rollers, optional free-span sputtering zones and active vacuum static neutralizers protect sensitive hard-coated PET surfaces from roller micro-scratches and dust attraction.
-
Superior metal-to-PET peel adhesion. In-vacuum plasma surface activation combined with dual -125 °C Polycold water-vapour traps removes moisture and oligomers from the PET surface, preventing metal delamination during slitting and lamination.
-
Multi-cathode single-pass optical stacks. Up to 8–10 planar or cylindrical rotary magnetron cathodes arranged around the drum deposit complex Ag/dielectric solar films or transparent AlOₓ/SiOₓ barriers in one continuous pass without rewinding in air.
-
Real-time cross-web optical & electrical QA. Traversing VLT/colour spectrophotometers and eddy-current ohm probes verify uniformity across 1,600+ mm widths and automatically trim power zones to keep every slit roll within buyer tolerance.
-
Cleanroom-ready roll-out winding carriage. The entire winding assembly slides out on rails into a cleanroom enclosure for rapid jumbo-roll loading and effortless web threading.
-
12-month warranty & discounted consumables. Built in-house by Ningbo Danko's 90-person team, every line includes a free 12-month warranty, onsite commissioning, operator training and long-term discounted targets, boats and seals.
Taper-tension rewind programming ensures smooth, firm jumbo rolls with zero telescoping or air-pocket blocking—even when winding ultra-slick 12 µm metallized BOPET at 400 m/min or thick 125 µm sputtered window film.
For silver-based low-E and window films prone to tarnishing, our inline PECVD or reactive nitride/oxide top-capping zone seals the silver layer inside the vacuum chamber before the PET web ever contacts ambient humidity.
When comparing PET film PVD coaters, inspect drum thermal uniformity, residual water-vapour pumping speed and inline VLT/sheet-resistance accuracy—these decide whether your coated polyester sells as premium optical/barrier grade or gets downgraded to commodity scrap.

Email:
Tel:+86-13486478562
Language
Español
Português











Tel: +86-13486478562
FAX: +86-574-62496601
Email:
Address: No. 79 West Jinniu Road, Yuyao, Ningbo City, Zhejiang Provice, China