Super Hard PVD Coating Machine

-- Steady & Reliable Manufacturer --

Introduction

A Super Hard PVD Coating Machine deposits advanced nitride, carbonitride, and nanocomposite thin films—such as TiAlN, AlCrN, TiAlSiN, and superlattice coatings—achieving micro-hardnesses exceeding 3,000 to 4,000 HV and exceptional thermal stability for high-speed cutting tools, heavy-duty forming dies, and extreme wear components. At Ningbo Danko Vacuum Technology Co., Ltd., we design and manufacture industrial super-hard PVD coating systems in Yuyao, Ningbo, building on vacuum equipment engineering experience established in 2007 under our former name Huahong Vacuum Technology.

In modern machining, stamping, and high-performance engineering, conventional titanium nitride (TiN) coatings often soften at cutting temperatures exceeding 500 °C. Super-hard PVD coatings utilize advanced multi-component alloy targets (such as TiAl, AlCr, and TiAlSi) combined with filtered steering arc or high-power impulse magnetron sputtering (HiPIMS) to form dense, nanocrystalline or amorphous-matrix nanocomposite structures. These films maintain high hardness, oxidation resistance up to 900–1,100 °C, and low friction under dry, high-speed cutting and abrasive stamping conditions.

Danko builds super-hard coating systems with robust vertical stainless steel chambers equipped with multi-steered arc cathodes, optional planar magnetrons, high-voltage pulsed bias power supplies (up to 1,500 V), and multi-zone radiant heating up to 550 °C. The pumping group pairs mechanical roughing pumps, Roots blowers, and high-speed oil diffusion or turbomolecular pumps to maintain ultra-high vacuum purity.

Applications include high-speed carbide end mills, drills, hobbing cutters, broaches, deep-drawing dies, plastic injection mould components, and aerospace turbine parts.

Engineered and fabricated in-house by our team of approximately ninety engineers and technicians in Yuyao, every super-hard coating system undergoes rigorous vacuum and test-coating runs prior to dispatch, backed by a free 12-month complete equipment warranty, onsite installation and operator training, and long-term discounted supply of alloy targets and vacuum spares.

Specification

Super-hard PVD coating systems are engineered around advanced alloy cathode compositions, high-temperature substrate heating, and high-energy ion bombardment. The table below outlines our standard industrial super-hard build in Yuyao.


Item Typical Configuration Notes
Coating Technology Multi-steered cathodic arc evaporation + optional HiPIMS / magnetron sputtering Delivers high ionization rates necessary for dense, nanocrystalline super-hard films.
Chamber Structure Vertical cylindrical double-wall vessel in 304 stainless steel with water cooling Electropolished interior walls reduce outgassing and ensure high vacuum purity.
Chamber Diameters Standard diameters from 800 mm to 1,500 mm; custom heights on request Optimized for dense loading of cutting tools, hobs, inserts, and forming dies.
Cathode Configuration 4 to 8 steered arc cathodes with magnetic steering control Arranged around chamber walls for uniform plasma flux on rotating tool carousels.
Target Materials TiAl, AlCr, TiAlSi, CrAlSi, TiN, and custom high-purity alloy targets Supports TiAlN, AlCrN, TiAlSiN, and nanocomposite super-hard layers.
Pumping Group Mechanical roughing pump + Roots blower + diffusion pump or turbomolecular pump Selected to maintain ultra-high vacuum purity and fast batch cycle turnaround.
Ultimate Vacuum Typically better than 5 x 10⁻³ Pa in a clean, dry chamber Removes residual oxygen and moisture to prevent oxide contamination in films.
Substrate Heating Advanced radiant resistance heaters with working temperatures up to 550 °C Higher heating temperatures promote crystal lattice densification in TiAlN/AlCrN.
Fixture System Planetary multi-axis rotation carousel with variable speed drive Specialized tool holders ensure even coating on cutting edges and flutes.
Process Gases Mass flow controlled channels for Argon, Nitrogen, Acetylene, and Oxygen Precise partial pressure regulation ensures stoichiometric nitride formation.
Substrate Bias Pulsed DC bias supply (adjustable up to 1,200 V) with arc suppression Drives energetic ion bombardment before deposition and during film growth.
Film Performance Hardness 3,000–4,500 HV; Oxidation resistance up to 900–1,100 °C Withstands extreme thermal and mechanical stress in high-speed machining.
Control System PLC with touchscreen HMI, recipe storage, and automated vacuum sequencing Automates pump-down, heating, ion etching, gas ramping, and deposition.
Warranty & Support 12-month free warranty on complete equipment; long-term spare parts supply Includes starting tool-coating recipes, onsite installation, and operator training.

Send us your tool or die specifications and cutting/forming test requirements. Our engineers will verify alloy target pairings, heater capacity, and fixture design before confirming specifications.

Application

Super-hard PVD coating machines are deployed in precision tooling, aerospace machining, and heavy-duty forming industries where tools face extreme temperatures, abrasive wear, and high mechanical loads. Key applications include:

  • High-speed cutting tools and drills. Carbide end mills, twist drills, taps, reamers, and indexable inserts coated with TiAlN or AlCrN to enable high-speed dry machining of hardened steels and cast iron.

  • Gear cutting hobs and shaper cutters. Complex multi-tooth gear tools operating under severe thermal and mechanical fatigue, benefiting from high oxidation-resistant AlCrN layers.

  • Stamping dies and progressive forming tools. Punching dies, drawing tools, and cold-forging punches coated with super-hard layers to eliminate galling and extend maintenance intervals.

  • Plastic injection moulds and extrusion dies. Mould components handling abrasive glass-filled plastics, requiring high surface hardness and corrosion resistance.

  • Woodworking and aluminium machining tools. Special multi-layer coatings optimized for high-speed cutting of abrasive wood composites and gummy aluminium alloys.

  • Aerospace turbine and structural components. High-temperature alloy parts requiring wear protection under severe operating conditions.

The primary advantage of super-hard PVD coatings in tooling applications is the formation of a protective aluminium-oxide ($ ext{Al}_2 ext{O}_3$) scale on the coating surface during high-temperature cutting. This thermal barrier shields the underlying tool substrate from oxidation and crater wear, allowing machine shops to increase cutting speeds by 50% to 100% without coolant.

Send our Yuyao engineering team your tool samples and cutting parameters—we will recommend the optimal super-hard alloy recipe and fixture layout.

Advantage

Super-hard PVD coating machines require advanced vacuum engineering, precise gas control, and robust high-temperature heating systems. Tool manufacturers and job shops choose Danko super-hard coaters for several key advantages:

  • Exceptional hardness & thermal stability. Delivers films exceeding 3,000–4,500 HV with oxidation resistance up to 1,100 °C, ideal for high-speed dry machining.

  • Advanced alloy target versatility. Supports TiAlN, AlCrN, and nanocomposite multi-component targets for tailored hardness and friction performance.

  • High-temperature radiant heating (550 °C). Robust heaters ensure thorough substrate outgassing and optimal crystal lattice densification for maximum coating adhesion.

  • Steered-arc macroparticle reduction. Advanced magnetic steering control minimizes macroparticle emission from arc cathodes, yielding smoother tool cutting edges.

  • Fully automated recipe control. PLC touchscreen automation manages pump-down, heating, ion etching, gas ramping, and deposition with high repeatability.

  • In-house manufacturing excellence. Built entirely by Ningbo Danko's 90-person technical team, ensuring robust mechanical and electrical integration.

  • 12-month warranty & technical backing. Supported by a free 12-month complete equipment warranty, starting tool recipes, onsite installation, and lifelong spare parts supply.

Maintenance is straightforward: removable stainless steel chamber shields catch overspray during multi-shift tool coating runs, allowing technicians to clean the vessel quickly.

Target utilization is optimized through custom magnetic field design, ensuring expensive TiAl and AlCr alloy targets are consumed evenly before replacement.

When comparing super-hard PVD quotes, inspect heater temperature rating, cathode steering stability, and pumping train capacity to ensure true industrial tool-coating performance.

Ningbo Danko Vacuum Technology Co., Ltd. Since 2020

Founded in 2007 as previous name Huahong Vacuum Technology, is a nationwide renowned PVD vacuum coating system manufacturer and vacuum coating technology developer, including but not limited to Sputtering Systems, Optical Coating Units, Batch Metallizers, Physical Vapor Deposition (PVD) Systems, Hard and Wear Resistant Vacuum Coating Deposition Equipment, Glass, PE, PC Substrate Coaters, Roll-to-Roll Machines for coating flexible substrates. The machines are used for a wide range of applications described below (but not limited to) Automotive, Decorative, Hard coatings, Tool & Metal Cutting coatings, and thin film Coating applications for industrial and Laboratories including Universities.
Danko Vacuum Technology Co., Ltd is committed to expanding our market boundaries by providing high-quality, high-performance vacuum coating equipment. Our Company is highly focused on after-sales service in Domestic and International markets, providing accurate part processing plans and professional solutions to meet customers' needs.
Ningbo Danko Vacuum Technology Co., Ltd.
Message Feedback