Common Vacuum Terminology 4
1.ψ collision rate:In a given time interval, the average number of collisions of a molecule (or other specified particles) relative to other gas molecules (or other specified particles) divided by tha...
1.ψ collision rate:In a given time interval, the average number of collisions of a molecule (or other specified particles) relative to other gas molecules (or other specified particles) divided by tha...
ranges of vacuum:The vacuum region is roughly divided as follows: Pa Torr Low vacuum: 105~102 760~1 Medium vacuum: 102~10-1 1~10-3 Hi...
1.Pa pascal:International unit of pressure, 1Pa = 1N/m2. 2.Torr torr:Unit of pressure, 1 Torr = 1/760 atm.China PVD Coating Systems suppliers atm standard atmosphere:Unit of pressure, 1atm=101325Pa。 3...
standard ambient condition:The temperature is 20℃, the relative humidity is 65%, and the atmospheric pressure is101325Pa=1013.25mbar=760Torr。PVD Coating Systems suppliers standard reference conditi...
sputtering deposition Basic Principles A solid surface is bombarded with energetic particles (usually positive ions accelerated by an electric field). Sputtering of atoms and molecules on solid surfac...
Vacuum evaporation plating Basic Principles Vacuum evaporation coating is a method of heating the raw materials to form thin films in evaporation container in vacuum chamber to make atoms or molecules...
Common vacuum leak detection methods High Frequency Spark Leak Detection This method is only applicable toChina Multi-arc ion coating machine Supplier glass vacuum system. , the system ...
Vacuum meter leak detection method The readings of some vacuum gauges are related to the types of gases, such as thermocouples and ionization vacuum gauges. Choosing appropriate gas or liquid as leaka...
Vacuum Mud Sealing Detection Method Vacuum mud will be sealed one by one suspicious leak point, pay attention to the change of vacuum degree. If the vacuum degreeHard film vacuum coating machine Suppl...
Leak detection by helium mass spectrometry This technology is an indispensable technology in the field of vacuum leak detection. It is widely used in leak detection because of its high leak detection ...
Common methods of PVD Technology Arc ion plating The cathodic arc technology is used to deposit thin film materials by ionizing the target material into ionic state under vacuum conditions with low vo...
Common methods of PVD Technology RF (radio frequency) sputtering The frequency of RF sputtering is about 13.56 MHz. It does not need hot cathode and can sputter at lower pressure and voltage. RF sputt...
Tel: +86-13486478562
FAX: +86-574-62496601
Email: [email protected]
Address: No. 79 West Jinniu Road, Yuyao, Ningbo City, Zhejiang Provice, China
OEM/ODM PVD Coater Manufacturers