Ningbo Danko Vacuum Technology Co., Ltd. designs and builds Decorative vacuum coating machines for manufacturers that need consistent colour, metallic lustre and wear-resistant finishes on metal, plastic, glass and ceramic parts. Founded in 2007 as Huahong Vacuum Technology and operating under the Danko name since 2020, we develop PVD systems, sputtering equipment, batch metallizers and roll-to-roll coaters from our base in Yuyao, Ningbo, China.
Our decorative range covers thermal evaporation, multi-arc ion, magnetron sputtering, combined evaporation-sputtering and large-format steel and furniture platforms. Each system is configured around the substrate, the required film stack and the production target rather than supplied as a fixed catalogue unit.
Our Decorative Vacuum Coating Machine Range
The five platform families below share vacuum architecture, controls and process know-how but differ in deposition source, chamber format and throughput. We select the platform first, then size the chamber, pumping set and source arrangement around the parts.
Resistance-heated evaporation of aluminium, chrome or copper for bright metallized finishes on plastics, glass and coated parts. Vertical and horizontal chamber formats, with UV lacquer line options for plastic substrates.
Cathodic arc deposition with pulse bias for TiN, TiC, ZrN, CrN and multi-layer decorative films. Suited to sanitary ware, door handles, watches, lamps, hardware and dark black finishes on high-quality parts.
Large-area platforms for stainless steel sheets, plates, pipes, tubes, furniture components and ceramic tiles, using multi-arc or MF sputtering sources in horizontal or vertical chambers.
Magnetron sputtering coating machine
MF and DC sputtering for smooth, dense decorative films with controlled colour and low droplet count, including stainless-steel-sheet and architectural panel applications.
Thermal evaporation & magnetron sputtering coating machine
Combined platforms that pair evaporation with sputtering in one cycle, allowing a bright base layer plus a sputtered colour or protective top layer without re-loading the chamber.
Application Fit by Substrate and Finish
Decorative PVD is chosen where electroplating cannot deliver the colour stability, wear resistance or environmental profile required. The table below maps common part families to the platform we normally propose.
| Part / substrate |
Typical finish |
Recommended platform |
| ABS, PC, ABS+PC, PVC, nylon, acrylic after base coat |
Bright chrome-like, silver, gold, coloured metallized |
Thermal evaporation, vertical or horizontal |
| Stainless steel, brass, zinc alloy, electroplated parts |
TiN gold, ZrN, CrN, black, multi-layer colour |
Multi-arc ion coating |
| Stainless steel sheet, plate, pipe, furniture frames |
Uniform metallic colour over large area |
Large steel & furniture, MF sputtering |
| Glass, ceramic, mosaic tile |
Reflective, coloured, decorative mirror |
Multi-arc ion or sputtering |
| Watches, eyewear frames, jewellery, hotel supplies |
Premium gold, rose gold, black, brushed effect |
Multi-arc ion with fine fixturing |
Substrates must be electrically conductive or carry a conductive base coat, tolerate chamber temperatures above roughly 70 °C and be free of outgassing contamination. Plastics are normally base-coated and, where required, UV-cured before metallizing; metal parts are cleaned and, for arc processes, degreased and dried to avoid arc instability.
Critical Specifications We Confirm Before Build
- Chamber size and load: usable dimensions, jig envelope, batch weight and substrate thickness.
- Deposition sources: number and type of evaporation boats, arc cathodes or sputtering targets, and target material.
- Pumping and vacuum level: roughing and high-vacuum pump set matched to chamber volume and cycle time.
- Bias and heating: pulse bias supply, substrate heating and rotation for film uniformity.
- Film stack: single layer or multi-layer, target colour and thickness range.
- Cycle time: pump-down, heating, deposition and cooling time per batch.
- Utilities: power supply, cooling water, compressed air and floor space.
Configuration and Automation
We build each machine around the customer's part family. Chamber orientation, jig design, source layout and load-lock arrangement are decided together, because a fixture that suits a door handle will not suit a 1.2 m stainless sheet. For large-format work we offer horizontal and vertical chamber designs; for high-volume small parts we favour batch carriers with planetary rotation.
Control systems are configured around the required line interface. Recipe management, PLC sequencing, interlocks and data logging are set to the plant's operating language, and where a customer needs the coater linked to an upstream lacquer line or downstream handling, we agree the signal list during engineering rather than after delivery.
- Manual, semi-automatic or automatic batch sequencing.
- Recipe storage for multiple colours and film stacks.
- Optional UV curing line for plastic metallizing.
- Power supplies, vacuum pumps, pump oil and targets available as part of the scope through our vacuum accessories range.
Manufacturing, Quality and Acceptance
Our engineering and production team works under one roof in Yuyao, roughly 100 km from Ningbo Port. Machines are assembled, wired and leak-checked before shipment, and we run deposition trials on sample parts supplied by the customer so that colour, adhesion and coverage are reviewed before the system leaves the works.
Acceptance is agreed per project. Typical checks include vacuum leak rate, pump-down curve, source performance, film thickness and colour against an approved sample, and a run of production parts on the customer's jigs. Documentation covers operating manuals, electrical drawings, spare-parts lists and training for operators and maintenance staff.
Installation, Maintenance and Spares
Decorative coaters are installed on a level floor with the utilities brought to the agreed positions. We provide layout drawings before shipment so that foundations, power, water and exhaust can be prepared in advance. Commissioning includes vacuum qualification, recipe set-up and operator training.
- Scheduled replacement of targets, evaporation boats and shields.
- Pump oil changes and filter checks per the maintenance schedule.
- Chamber cleaning intervals set by the process and coating thickness.
- Spare parts and consumables supplied from our Ningbo base, with support through our overseas offices.
Information We Use to Configure Your Solution
A workable proposal depends on a small set of project inputs. When these are clear, we can size the chamber, choose the deposition source and quote a realistic cycle time.
| Input |
What we need |
| Parts |
Drawings or samples, material, dimensions, surface condition |
| Finish |
Target colour, gloss, film thickness, adhesion requirement |
| Output |
Parts per batch, batches per shift, target cycle time |
| Site |
Available floor space, ceiling height, power capacity, cooling water |
| Operation |
Operator skill level, shift pattern, automation expectations |
Frequently Asked Questions
Which decorative coating machine suits plastic parts?
Thermal evaporation is the usual choice for ABS, PC, ABS+PC, PVC, nylon and acrylic parts after base coating. It deposits aluminium, chrome or copper at high rate and can be combined with a UV lacquer line. Multi-arc ion is used where a harder, more wear-resistant decorative film is needed on a conductive or base-coated plastic.
Can one machine produce several colours?
Yes. Multi-arc and sputtering platforms can run TiN gold, ZrN, CrN, black and multi-layer stacks by changing targets, gas and recipe. Recipes are stored in the control system so operators can switch between approved finishes without re-engineering the process.
What substrate preparation is required?
Parts must be clean, dry and free of outgassing contamination. Plastics normally need a base coat and, where specified, UV curing. Metals should be degreased and free of loose oxide. The chamber temperature must be compatible with the substrate, and for arc coating the surface should be conductive or carry a conductive layer.
How is a large stainless steel sheet coated uniformly?
Large-format work uses horizontal or vertical chambers with MF magnetron sputtering or multi-arc sources arranged to cover the sheet width. Substrate motion and source spacing are set during engineering, and uniformity is verified on sample sheets before acceptance.
Do you supply targets, pumps and spare parts?
We supply power supplies, vacuum pumps, pump oil and consumption materials including targets through our consumption materials & targets range, so a new line can be commissioned with matched consumables and a defined spare-parts list.
What is the typical project sequence?
We review the part drawings and finish target, propose a platform and chamber size, agree the utility and site requirements, then build and trial the machine on customer samples. After shipment we support installation, commissioning and operator training, with after-sales service through our domestic and international teams.