Roll-to-Roll PVD Coating Machine

-- Steady & Reliable Manufacturer --

Introduction

A Roll-to-Roll PVD Coating Machine deposits continuous, uniform thin films onto flexible web substrates—such as PET, BOPP, CPP, polyimide (PI), copper foil and specialty paper—as the roll unwinds, passes over a chilled coating drum and rewinds inside a high-vacuum chamber. At Ningbo Danko Vacuum Technology Co., Ltd., we engineer and manufacture roll-to-roll web coaters in Yuyao, Ningbo, building on vacuum equipment expertise established in 2007 under the former name Huahong Vacuum Technology.

Unlike batch coaters that vent and pump down for every rack of 3D parts, a roll-to-roll vacuum web coater processes thousands of linear metres per pump-down at line speeds ranging from a few metres per minute (for precision multi-layer sputtered optical and conductive films) up to several hundred metres per minute (for thermal-boat metallized barrier packaging and capacitor webs). The core engineering challenge is handling delicate webs as thin as 4.5 µm without thermal wrinkling, telescoping, static discharge or coating-thickness drift across the web width.

Danko solves web-handling stability through a multi-zone closed-loop tension control system driven by AC servo motors, load-cell dancers and precision-ground chilled coating drums (-15 °C to +25 °C) that sink latent heat of condensation immediately as vapour hits the film. Depending on the target film stack, our roll-to-roll chambers integrate continuous wire-fed BN/TiB₂ resistance evaporation boats, DC/MF planar or rotary magnetron sputtering cathodes, electron-beam guns, or hybrid sputter-plus-evaporation zones separated by differential-pumping slit baffles.

Applications span high-barrier Al and transparent AlOₓ/SiOₓ food and pharmaceutical packaging, architectural solar-control window films, ITO/Ag transparent conductive films for touch panels, flexible printed circuit (FPC) copper seed layers, metallized capacitor dielectrics and decorative hot-stamping foils.

Designed and built in-house by our team of roughly ninety engineers and technicians, every Danko roll-to-roll coater is tested with full web-threading and vacuum-winding trials in Yuyao before shipment, delivered with baseline recipes, a free 12-month warranty on the complete equipment, onsite commissioning and operator training, and long-term discounted supply of evaporation boats, sputtering targets and vacuum spares.

Specification

Roll-to-roll vacuum coaters are engineered around web width, minimum film gauge, maximum roll outer diameter and deposition chemistry (high-speed boat evaporation vs. precision magnetron sputtering). The table below outlines our core Yuyao web-coater specifications.



Item Typical Configuration Notes
Deposition Sources Continuous wire-fed BN/TiB₂ boats, DC/MF planar or rotary magnetrons, or E-beam Multi-zone chambers allow dual-side or multi-layer deposition in a single pass.
Web Width Range Standard widths 500 mm, 800 mm, 1,100 mm, 1,350 mm and 1,650 mm (custom up to 2,200 mm) Source zone width includes edge-masking shields for crisp uncoated margins.
Substrate Materials PET, BOPP, CPP, PE, PI (Kapton), PVC, release paper, non-woven and metal foils Handles ultra-thin 4.5 µm capacitor film up to 250 µm rigid optical/decorative sheet.
Roll Capacity Max unwind/rewind OD up to 600–800 mm on 3-inch or 6-inch air/mechanical shafts Quick-lock shaft chucks and cantilevered or rail-rollout winding carriages cut changeover time.
Line Speed 0.5–30 m/min (magnetron sputtering); 60–480 m/min (thermal boat evaporation) Stepless digital speed synchronization with automatic source-power ramp-up/down.
Tension Control 4-zone closed-loop tension (unwind, pre-drum, drum, rewind) with load-cell feedback Maintains 10–500 N tension with ±1% accuracy and programmable taper tension at rewind.
Chilled Coating Drum Hard-chrome-plated precision drum, Ø400–800 mm, chilled to -15 °C to +25 °C Prevents heat wrinkling and curling on thin PET and BOPP webs during high-power runs.
Web Pre-Treatment In-vacuum glow-discharge plasma treater + water-cooled bow/expander rollers Removes moisture/oligomers and spreads webs flat prior to entering the coating zone.
Chamber Architecture Two-zone (winding vs. deposition) differentially pumped stainless steel vessel Differential slit isolation prevents roll outgassing from degrading sputtering plasma purity.
Pumping System Dry screw/rotary-piston pumps + multi-stage Roots + diffusion or turbomolecular pumps Includes -125 °C cryogenic Polycold coil in the winding zone to trap web moisture.
Vacuum Performance Empty chamber base 2 x 10⁻³ Pa; roll-loaded pump-down to 3 x 10⁻² Pa in 12–20 min High pumping conductance handles continuous outgassing from jumbo film rolls.
Inline Monitoring Inline optical density (OD) scanner, eddy-current sheet-resistance probe & viewing camera Closed-loop feedback adjusts wire feed or sputter power to hold ±3% cross-web uniformity.
Layer Capabilities Al, Cu, Ag, Au, Ti, Cr, NiCr, ITO, AlOₓ, SiOₓ, TiO₂ and multi-layer optical/barrier stacks Thickness from 5 nm semi-transparent low-E layers up to 2 µm FPC copper seed layers.
Control & Automation Multi-axis PLC + industrial PC HMI with roll-length recipe logs and fault diagnostics Exports full metre-by-metre tension, OD/resistance and vacuum QA records per jumbo roll.
Site Utilities 3-phase 380 V 50 Hz (adaptable), industrial chiller loop, compressed air, dry N₂ Overhead crane clearance requirements provided in preliminary plant layout drawing.
Warranty & Spares 12-month free warranty on complete equipment; long-term discounted consumables Includes onsite commissioning, web-threading training and discounted boats/targets.

Share your substrate film type, gauge, roll width, target optical density or sheet resistance, and monthly square-metre output. Our web-coating engineers will propose the optimal drum diameter, source layout and pumping train.

Application

Roll-to-roll PVD coating converts commodity polymer films and foils into high-value functional, optical and protective materials at continuous industrial scale. Across our customer installations, Danko web coaters serve the markets below.

  • Flexible barrier food and pharma packaging. High-speed thermal boat evaporators deposit dense aluminium or transparent AlOₓ/SiOₓ oxygen- and moisture-barrier layers onto BOPP, PET and CPP webs for coffee pouches, snack bags and pharmaceutical blister lidding.

  • Architectural and automotive solar-control window films. Multi-cathode MF/DC magnetron sputter web coaters deposit spectrally selective silver, gold, titanium, NiCr and dielectric interference stacks on optical-grade PET for heat rejection and glare control.

  • Flexible printed circuits (FPC) and 5G antennas. Sputtering web coaters deposit ultra-adherent NiCr tie-layers followed by pure copper seed layers onto polyimide (PI) and LCP films without hazardous wet-chemical plating baths.

  • Metallized film capacitors and EV battery current collectors. Precision-masked thermal evaporators coat ultra-thin 4.5–8 µm BOPP/PET capacitor webs (including heavy-edge and segmented safety-margin profiles) as well as double-sided copper/aluminium layers on thin polymer substrates for composite battery foils.

  • Transparent conductive films (ITO / Metal Mesh / AgNW base). Low-temperature sputtered ITO and index-matched dielectric/silver/dielectric stacks on optical PET support flexible touch sensors, e-paper displays and smart switchable glass.

  • Decorative holographic, hot-stamping and yarn films. Embossed PET and release webs receive bright aluminium, copper or coloured metallic layers for security holograms, luxury carton lamination and metallic textile yarns.

  • Thermal insulation and reflective emergency blankets. Low-emissivity aluminized PET webs serve aerospace cryogenic insulation, radiant building barriers and rescue blankets.

Because polymer rolls trap significant moisture and air between wound layers, Danko isolates the unwind/rewind chamber from the deposition chamber using narrow water-cooled slit baffles and separate high-vacuum pumps. As the web unwinds, in-vacuum plasma treatment and cryogenic Polycold surfaces strip outgassed water vapour before the film wraps onto the chilled coating drum, ensuring strong metal-to-film adhesion and zero pinholes.

For customers developing new functional films, we also build compact 350–500 mm pilot roll-to-roll coaters equipped with modular magnetron and boat flanges so R&D recipes transfer directly to 1,350–1,650 mm production lines.

Send us your web specification and target barrier, optical or sheet-resistance metrics—our Yuyao team can test sample rolls and verify cross-web uniformity before finalizing machine design.

Advantage

In roll-to-roll vacuum coating, one web break or heat wrinkle inside a sealed vessel wastes hours of pump-down and thousands of metres of film. Danko engineers our web coaters around mechanical tension stability, thermal control and inline closed-loop quality.

  • Wrinkle-free 4-zone closed-loop tension control. Independent servo drives on unwind, pre-drum, chilled coating drum and rewind—paired with precision load cells and bowed spreader rollers—handle films down to 4.5 µm without creasing or telescoping.

  • High-efficiency chilled coating drum. Internal spiral-baffled coolant channels maintain uniform temperature across the full drum face (-15 °C to +25 °C), extracting deposition heat instantly so thin PET and BOPP stay flat.

  • Differential-pumping chamber isolation. Narrow conductance slits and dedicated winding-zone Polycold traps prevent moisture outgassing from jumbo rolls from contaminating the sputtering or evaporation zone.

  • Inline closed-loop OD & sheet-resistance feedback. Traversing optical-density and eddy-current sensors read coating uniformity across the moving web in real time and automatically trim individual wire feeders or cathode power zones.

  • Roll-out winding carriage for fast roll swaps. The entire unwind/rewind frame slides out of the chamber on precision rails, giving operators ergonomic 360-degree access for jumbo-roll loading, web threading and boat/target maintenance.

  • Modular sputter, boat & E-beam architecture. Built in-house by Ningbo Danko's 90-person team, chambers can combine planar/rotary magnetrons and wire-fed evaporation boats to run multi-layer stacks in one pass.

  • 12-month warranty & discounted consumables. Supported by a free 12-month complete equipment warranty, onsite commissioning, web-handling training and long-term discounted boats, targets and seals.

Safety and web protection are built into the PLC: if an optical sensor detects a web tear or sudden tension spike, source power cuts within milliseconds and the chilled drum brakes smoothly to prevent melted film wrapping onto the drum surface.

In-vacuum edge masking and static-eliminator bars ensure clean, straight uncoated film margins and flat, tight rewind rolls ready for downstream slitting or lamination without blocking.

When comparing roll-to-roll PVD quotes, inspect drum runout tolerance, load-cell tension resolution and Polycold capacity—these three specifications separate reliable 24/7 production lines from machines plagued by web wrinkles and slow pump-downs.

Ningbo Danko Vacuum Technology Co., Ltd. Since 2020

Founded in 2007 as previous name Huahong Vacuum Technology, is a nationwide renowned PVD vacuum coating system manufacturer and vacuum coating technology developer, including but not limited to Sputtering Systems, Optical Coating Units, Batch Metallizers, Physical Vapor Deposition (PVD) Systems, Hard and Wear Resistant Vacuum Coating Deposition Equipment, Glass, PE, PC Substrate Coaters, Roll-to-Roll Machines for coating flexible substrates. The machines are used for a wide range of applications described below (but not limited to) Automotive, Decorative, Hard coatings, Tool & Metal Cutting coatings, and thin film Coating applications for industrial and Laboratories including Universities.
Danko Vacuum Technology Co., Ltd is committed to expanding our market boundaries by providing high-quality, high-performance vacuum coating equipment. Our Company is highly focused on after-sales service in Domestic and International markets, providing accurate part processing plans and professional solutions to meet customers' needs.
Ningbo Danko Vacuum Technology Co., Ltd.
Message Feedback